High-performance edge computer with NVIDIA® Jetson™ TX2


Edge computer with NVIDIA® Jetson™ TX2


The EDGEPLANT T1 is a high-performance edge computer with NVIDIA® Jetson™ TX2. The EDGEPLANT T1 provides GPU-based edge computing for AI and video processing. This edge computer also has a SIM slot, GPS module, and other features as an advanced IoT device.

1. All-in-one design

All-in-one design for IoT equipped with SIM slot and GPS

2. Design for industrial applications

  • Reliable hardware that can be used as an in-vehicle computer
  • Support for a wide range of power voltages (9–36 V) for reliable use in passenger vehicles, commercial vehicles, and construction equipment.
  • Conforms to the EMC standards (E mark) required for in-vehicle devices. Noise propagation to the vehicle power system and peripherals is suppressed, and high immunity performance is achieved.
  • Wide operating temperature range (−20°C–+65°C)
  • USB 3.0 connector with lock mechanism to prevent unintentional cable removal
  • Independent MCU for power management and fault monitoring
  • Highly maintainable external fan mechanism that combines dustproofing and cooling performance

3. Video data processing performance

Multiple camera inputs and encoding are supported.

* Camera is optional (example: See3CAM_CU30 x4 units)

4. In-vehicle mounting

  • Conformance to the EMC standards (E mark) and reliability standards (JASO D014) required for in-vehicle devices
  • Support for a wide range of power supplies (9–36 VDC)
  • Automatic startup and automatic shutdown linked to the ignition of the engine (motor)
  • Wake on CAN that starts the computer in response to a specific CAN signal

5. Build an edge computing system suited to your application

Product specifications of EDGEPLANT T1 (ET1-128NJA)

SoM NVIDIA® Jetson™ TX2 4GB
CPU Dual NVIDIA® Denver 2 (2.0 GHz), Quad ARM®Cortex®-A57 (2.0 GHz)
6 cores total
System memory 4GB 128-bit LPDDR4 (1600MHz)
MCU STMicroelectronics STM32L071K
RTC Microchip MCP7940M
Watchdog timer To be supported with firmware update.
Fault log Faults can be logged in the EEPROM of the MCU.
Built-in storage 16GB eMMC
1 × M.2 Key M 2242 with SATA3.1*1
GNSS u-blox NEO-M8 series
- Supported satellite positioning systems are GPS, Glonass, QZSS, Galileo, and BeiDou.
- The clock can be calibrated at high precision using the PPS signal.
LTE 1×M.2 Key B with USB 3.0
- The EM7430 module from Sierra Wireless is supported.*2
USB 4 × USB 3.0 (Type A connector with lock mechanism)
Ethernet 1 × 1000Base-T (RJ45)
Audio 1 × 4-pole CTIA (mini jack)
HDMI output 1 × HDMI 1.4b (Type A connector)
Wake on CAN Power-on and shutdown function using CAN communication (to be supported with firmware update)
Serial communication 1 × RS-232C (D-Sub 15pin)
LED 1 × Power LED
1 × Status LED
Antenna terminal 1 × SMA for GNSS
2 × SMA for LTE
Protection code of cooling fan IP55
SIM card slot 1 × Nano SIM*2
Maintenance terminal 1 × USB 2.0 (for recovery)
Supported OS NVIDIA® L4T
Standards FCC Class B, CE, E-mark (ECE Regulation No.10, Revision 6)
Operating temperature −25°C – +65°C
Operating humidity 10%–90% (no condensation)
Storage temperature −40°C – +85°C
Storage humidity 10%–90% (no condensation)
Standard external dimensions
(width × depth × height)
135 mm × 143 mm × 48.5 mm (excluding the protrusion)
Weight Approx. 1.0 kg
Power supply 9–36 VDC, 4.6 A (max.)

*1. A 128-GB industrial grade SSD (Greenliant® GLS87DP128G3-I-BZ202) is equipped as standard.
*2. LTE module and SIM card are not included. Recommended products are available for purchase from us.